International Journal of Energy Engineering
International Journal of Energy Engineering(IJEE)

ISSN:22256563(Print)
ISSN:22256571(Online)

Frequency: Yearly

EditorinChief: Prof. Sri Bandyopadhyay(Australia)


The Effect of Web Corrugation Angle on Bending Performance of Triangular Web Profile Steel Beam Section 

Full Paper(PDF, 201KB) 


Abstract: 

The structural action of a beam is predominantly bending, with other effects such as shear, bearing and buckling also being presented. Due to the more application of corrugated section in steel design, this paper develops a threedimensional finite element model using LUSAS 14.3 to investigate the effects of web corrugation angle on bending behavior of Triangular Web Profile (TRIWP) steel sections. A triangular web profile (TRIWP) steel section is a builtup steel section made up of two flanges connected to a web plate of triangular profile. Thin shell element was chosen to represent the element type of the model. Two sizes of flat webs (FW) as control specimens and two sizes of TRIWP which are 200×100×6×3 mm and 180×75×5×2 mm section were used. Each of beam section was modeled using several spans such as 3 m, 4 m and 4.8 m and different corrugation angles (150,300,450,600 and 750). It was noted that deflection of 450 and 750 web corrugations angle be the lowest deflection value either in minor or major axis of TRIWP steel section. It means that the TRIWP steel section is stiffer when the web corrugation angle is 450 or 750. In other word, TRIWP steel section has a higher resistance to bending in minor and major axis when the web is used in both corrugation angles. 

Keywords:Finite Element Model; Bending; Triangular Web Profile 

Author: Fatimah De’nan^{1}, Nor Salwani Hashim^{1}  1.School of Civil Engineering, University Sains Malaysia,Penang, Malaysia 

References:  M. Elgaaly, R.W. Hamilton, and A. Seshadri, “Shear strength of beams with corrugated webs,” Journal of Structural Engineering. ASCE, vol. 122, pp. 390398 (4) 1996.
 M. Elgaaly, A. Seshadri, and R.W. Hamilton, “Bending strength of steel beams with corrugated webs,” Journal of Structural Engineering ASCE, vol. 123, pp. 772782 (6) 1997.
 H. Atan, “Flexural Behaviour of Trapezoidal web Profile,” MSc Thesis. Universiti Teknologi Malaysia (2001).
 C.S. Tan, “Buckling Analysis of Compression member with Trapezoid Web Profile,” MSc. Thesis. Universiti Teknologi Malaysia (2004).
 F. Denan,“Lateral Torsional Buckling Behaviour of Trapezoidal Web Profile,” PhD Thesis. Universiti Teknologi Malaysia (2008).
 M. Elgaaly and A. Seshadri, “Girders with corrugated webs under partial compressive edge loading,” Journal of Structural Engineering ASCE, vol. 123 pp. 783791 (6) 1997.
 R.P. Johnson and J. Cafolla, “Local flange buckling in plate girders with corrugated webs,” Proceedings of the Institution of Civil Engineers, Structures and Buildings, vol. 122, pp. 148156 (2) 1997.
 R.P. Johnson and J. Cafolla, “Corrugated webs in plate girders for bridges,” Proceedings of the Institution of Civil Engineers, Structures and Buildings, vol. 122, pp. 157164 (2) 1997.
 R. Luo and B. Edlund, “Ultimate strength of girders with trapezoidally corrugated webs under patch loading,” Journal of ThinWalled Structures, vol. 24, pp. 135156 (2) (1996).
 R. Luo and B. Edlund, “Shear capacity of plate girders with trapezoidally corrugated webs,” Journal of ThinWalled Structures, vol. 26, pp. 1944 (1) 1996.
 W. Zhang, Y. Li, Q. Zhou, X. Qi and G.E.O. Widera, “Optimization of the structure of an H beam with either a flat or a corrugated web: Part 3. Development and research on Hbeams with wholly corrugated webs,” Journal of Materials Processing Technology, vol. 101, pp. 119123, 2000.
 Y. Li, W. Zhang, Q. Zhou, X. Qi and G. E. O. Widera, “Buckling strength analysis of the web of a WCW Hbeam: Part 2. Development and research on Hbeams with wholly corrugated webs (WCW),” Journal of Materials Processing Technology, vol. 101, pp. 115118, 2000.
 S. Jamali, “Lateral Torsional Buckling of Trapezoid Web Profile,” MSc. Thesis, Universiti Teknologi Malaysia (2004).
 C.L. Chan, Y.A. Khalid, B.B. Sahari and A.M.S. Hamouda, “Finite element analysis of corrugated web beams under bending,” Journal of constructions steel research, vol. 58, pp. 13911406, 2002.
 Y.A. Khalid, C.L. Chan and B.B. Sahari, “Bending behaviour of corrugated web beam,” Journal of materials processing technology, vol. 150, pp. 242254, 2004.
 M. Elgaaly and A. Seshadri, “Depicting the behavior of girders with corrugated webs up to failure using nonlinear finite element analysis,” Journal of advances in engineering software, vol. 29, pp. 195208, 1998.

